Anritsu Network Master MT9090A Series, Operation Manual, Page: 151 / 200

MT9090A/MU909011A Network Master User’s Guide 5-9
Once the self-test is complete, one of the following
initial test application screens appears depends on
the Power Meter Step and Connection Check Step
settings made on the Preferences Setup screen (see
Figure 4-4 on page 4-5): Power Meter Step screen
(see Figure 3-1 on page 3-2), Connection Check
Step Screen (see Figure 3-2 on page 3-3) or the
initial Fault Locate Step screen (see Figure 3-3 on
page 3-3).
5. Press the Menu/Power key to display the General
Functions pop-up menu (see Figure 3-4 on
page 3-5).
6. Use the Up and Down Arrow keys to highlight the
VIP selection in the menu, if not already
highlighted.
7. Press the Set key to launch the VIP application.
8. Use the
2
00x/400x switch (see item 3 in Figure 5-2
on page 5-2) to set the desired magnification rate.
The example shown in Figure 5-8 on page 5-8 has
the magnification rate set to 400x.
9. Use the Focus Control knob (see item 2 in
Figure 5-2 on page 5-2) to adjust the focus of the
image, if the image is not in clear focus.
10. Toggle Mode Live ( F1 ); the legend on the softkey to
Mode Frozen and Capture ( F2 ) is now active.
11. Press Capture ( F2 ) if you desire to save a PNG file
of the current image.