Anritsu Network Master MT9090A Series, Operation Manual, Page: 105 / 200

MT9090A/MU909011A Network Master User’s Guide 4-7
General Setups
The General setups consist of settings common to all
Network Master applications: Date & Time, Color Theme,
Language, Auto Backlight (auto time-out) and Auto Power
Off.
See “To set the General Setups in the Fault Locate
application:” on page 3-12 for details.
Fault Locate Parameters Setups
Use the Parameters setups to set the thresholds used to
determine the End/Fault Distance as well as the events
reported in the Event Table on the Fault Locate Summary
screen. In addition, set the IOR (Index of Refraction) and
BSC (Backscatter Coefficient) values for the fiber under test.
Use the following procedure to establish the desired
Parameters settings
To set the Parameters:
1. Enter the Setup screen. See “To access the Setup
screen:” on page 4-4 for details. The Preferences
Setup screen appears.
Or, start at step 2 if you are already in Setup.
2. Press Parameters ( F3 ), the Parameters Setup screen
appears (see Figure 4-5 on page 4-8).