Anritsu Network Master MT9090A Series, Operation Manual, Page: 92 / 200

3-24 MT9090A/MU909011A Network Master User’s Guide
To copy multiple files or folders:
1. Access the Mass Storage File Operations screen. See
“To access the Mass Storage file operations:” on
page 3-18 for details.
2. With the Device field highlighted, use the Left or
Right Arrow key to select the mass storage device;
Internal or USB .
If there is no USB device attached to the unit, the
device selection is automatically set to
Internal .
3. Navigate to the desired directory or folder.
4. Press Multi-Select Off ( F2 ). The red legend on the
softkey changes to “ On ” and a blank check box is
displayed before each filename in the current
directory/folder.
5. Highlight the first file or folder to copy and then
press the
Set key . A checkmark appears in the check
box for the highlighted file.
Repeat until all the desired files or folders are
selected and continue at step 6.
Or –
To select all of the files in the current folder or all of
the folders in the current directory; press
File
Operations ( F1 ), highlight Select All , press the Set
key and then continue at step 6.
6. Press File Operations ( F1 ). The File Operations
pop-up menu appears.
7. Highlight Copy and then press the Set key . The
Destination window is superimposed over the Mass
Storage File Operations screen.