Anritsu Network Master MT9090A Series, Operation Manual, Page: 148 / 200

5-6 MT9090A/MU909011A Network Master User’s Guide
To Attach a Probe tip with Optics:
1. Loosen the rear retaining nut on the barrel assembly
(see item 2 in Figure 5-6).
2. Align the key channel on the probe tip with the key
on the probe housing (see items 3 and 4 in
Figure 5-6).
3. Secure the retaining nut on the probe tip to the
probe housing.
Figure 5-6: Attaching a Probe Tip with Optics
Connecting the VIP to the USB Converter
Use the following procedure to connect the Video Inspection
Probe to the USB converter.
To connect the VIP to the USB converter:
1. Align the connector on the coiled cord of the VIP
with the receptacle on the USB converter (see items
2 and 4 in Figure 5-7 on page 5-7). When properly
aligned, the connector slides into the receptacle.
2. Use the retaining nut (see item 3 in Figure 5-7 on
page 5-7) on the connector to secure it to the USB
converter (see item 4 in Figure 5-7 on page 5-7).
1.
2.
3.
4.
Barrel assembly
Rear retaining nut
Key channel
Key