manualshive.com logo in svg

Anritsu Network Master MT9090A Series, Operation Manual, Page: 83 / 200

Share
Download
Anritsu Network Master MT9090A Series Operation Manual Download Page 83

MT9090A/MU909011A Network Master User’s Guide

3-15

3.

Highlight 

Setup

 on the pop-up menu and then 

press the 

Set key

. The General Setup screen appears.

4.

Highlight 

Defaults

 and press the 

Set key

. 

Note

As of the current software release, the Auto 
Backlight and Auto Power Off parameters are the 
only General Setup parameters re-set via the 

Defaults

 button.

5.

Highlight 

Apply

 and then press the 

Set key

. The 

General setup defaults are now set and the Top 
Menu screen reappears.

To return the Fault Locate application defaults:

1.

With the Fault Locate application active, press the 

Menu/Power key

.

2.

Highlight 

Setup

 on the pop-up menu and then 

press the 

Set key

. The initial setup screen for the 

application appears.

3.

Highlight 

Defaults

 and press the

 Set key

. The all 

setup screens for the application now display their 
default setting.

Note

As of the current software release, the Auto 
Backlight and Auto Power Off parameters are the 
only General Setup parameters re-set via the 

Defaults

 button.

4.

Highlight 

Apply

 and then press the 

Set key

. All of 

the setup defaults are now applied and the unit 
returns to the test application.

Summary of Contents for Network Master MT9090A Series









































































































































































































Reviews:

No comments