Anritsu Network Master MT9090A Series, Operation Manual, Page: 150 / 200

5-8 MT9090A/MU909011A Network Master User’s Guide
Accessing VIP Mode
To start the VIP:
1. Assemble the VIP and attach it to the unit as
outlined in “VIP Setup” on pages 5-3 through 5-7.
2. Depending on the probe tip selected, connect the
probe to the bulkhead or patch cord to be tested.
3. If the Network Master was already powered up
before connecting the USB from the VIP, the VIP
application is automatically launched in Live Mode
(as shown in Figure 5-8). Continue at step 8.
Or –
If the unit was not powered up, continue at step 4.
Figure 5-8: VIP Screen – Live Mode
4. Press the Menu/Power key . The unit preforms
a self-test during which the Anritsu splash screen
briefly appears, followed by the Network Master
splash screen.