Anritsu MT8850A, Operation Manual, Page: 72 / 156

MT8850A / MT8852A Bluetooth Test Set Using the Script Menu
8-12 13000-000109
Testing in Standard Script Mode January 2003
3. Press the [Setup] soft key.
The Output power test conditions screens are displayed.
The “Hopping test mode” can be set to “Defined”, “All” or “Any”. You can also choose
the “Test type”, “loopback” or “TX”, to use and set the packet type.
4. Choose Hopping test mode.
5. Press the key to switch between Defined, All and Any.
6. Choose “No. of packets”.
7. Enter the value using the keypad.
8. Choose Test type.
9. Press the key to switch between Loopback and TX.
10. Choose “Packet type”.
11. Press the key repeatedly until the required packet type, Longest, DH1, DH3
or DH5 is displayed. Longest sets the packet type to the longest length that the EUT
supports during the link setup process.
12. Press the [1 of 2] soft key to move to the second screen.
You can select or deselect the test to run and make changes to the frequency.
When the Hopping test mode is set to All or Any, the Low, Medium and High
frequencies are not applicable and they are displayed as hollow ellipses.
13. To select or deselect a test, choose the test and press the key.
14. To change a frequency, choose the frequency, press the key, enter the value
using the keypad and press the [Enter] soft key.
15. Press the [Defaults] soft key to restore the default values.