Anritsu MT8850A, Operation Manual, Page: 132 / 156

MT8850A / MT8852A Bluetooth Test Set Specification
C-2 13000-000109
January 2003
Output Power
MT8852A measures average and peak power according to the Bluetooth RF Test
Specification. Measurement of output power is made with the EUT in test mode, loopback
enabled and hopping on. MT8850A/MT8852A transmits the longest supported packets
and longest supported payload length, with a PRBS 9 payload. Power is measured at
three defined frequencies. MT8850A/MT8852A identifies the position of p0 and measures
the power of every bit in the packet.
Link conditions:
Hopping: ON – measure at Defined, All, or Any frequencies
Test mode: ON
Loopback or TX mode
Payload: PRBS 9
Packet type: DH1, DH3, DH5
Measurement:
Supported measurements: Average power, peak power
Number of measurement channels: User selectable, Defined (3), All, or Any
Measurement range: +22 dBm to -50 dBm average power (+23 dBm peak
power)
Resolution: 0.1 dB
Accuracy: +20 dBm to -35 dBm, ±1 dB
+22 dBm to +20 dBm, ±1.5 dB
Speed: Greater then 300 DH1 packets/sec. with hopping mode set to “Any”.