Anritsu MT8850A, Operation Manual, Page: 135 / 156

Specification MT8850A / MT8852A Bluetooth Test Set
13000-000109 C-5
January 2003
Initial Carrier Frequency Tolerance
MT8850A/MT8852A measures initial carrier frequency tolerance according to the
Bluetooth RF Test specification.
Measurement of initial carrier frequency is made with the EUT in test mode, TX mode and
hopping on and/or off. MT8850A/MT8852A transmits DH1 packets, with a PRBS 9
payload. Initial carrier frequency is measured at three defined frequencies.
MT8850A/MT8852A identifies the position of p0 and measures the average frequency of
the 4 preamble bits.
Link conditions:
Hopping: OFF or ON – measure at Defined, All, or Any frequencies
Test mode: ON
Loopback or TX mode
Payload: PRBS 9
Packet type: DH1
Measurement:
Supported measurements: Initial carrier frequency error
Number of measurement channels: User selectable, Defined (3), All, or Any
RF input measurement range: +20 dBm to -35 dBm
Initial frequency error measurement range: 0 Hz to ±150 kHz
Frequency resolution: 1 kHz
Accuracy: 1 kHz
Speed: Greater then 300 DH1 packets/sec. with hopping mode set to “Any”.