Anritsu MS8608A, Operation Manual, Page: 95 / 338

Section 5 Setting Functions
5-19
Setting Ethernet
Step Procedure
1 Move the cursor to the item to be set using the Entry keys or the rotary knob.
2
Press the Set Entry key.
3
The setting window opens.
4 Set the value using the numeric keys or the rotary knob.
5 Press the Set key.
After the setting is completed, the set value for each ETHERNET item appears on the
screen.
The description of each item is shown below.
• My IP Address
Sets the IP address for the equipment.
• Net Mask Address
Sets the net mask address.
• Gateway Address
Sets the gateway address.
• Host Address
Sets the IP address for the controller.
When a value other than 0 is set, the communication object is fixed.
When 0 is set, the communication object is not fixed.
• Port Address
Set the same value as for the Port Address of the controller.
Note:
When the Ethernet address is set/changed, turn Off and then On the power.
Without this operation, the new address setting takes some times.