Anritsu MS8608A, Operation Manual, Page: 42 / 338

Section 1 General
1-20
• Option 03: Extension of preselector lower limit (only for MS8608A)
Outline
Frequency band
Pre-selector range
Average noise level
High Power Input
Low Power Input
Residual response
Frequency response
2nd harmonic distortion
1 dB gain compression
Maximum dynamic range
Expands lower frequency limit of pre-selector from 3.15 to 1.6 GHz.
Band 0: 9 kHz to 3.2 GHz, Band 1–L: 1.6 to 3.2 GHz, Band 1–: 3.15 to 6.3 GHz
Band 1+: 6.2 to 7.8 GHz
1.6 to 7.8 GHz (Band 1–L, 1–, 1+)
At RBW 300 Hz, VBW 1 Hz
At input attenuator 20 dB
≤
–100 dBm + 0.8
×
f[GHz] dB (1.6 to 7.8 GHz, Band 1)
At input attenuator 0 dB
≤
–120 dBm + 0.8
×
f[GHz] dB (1.6 to 7.8 GHz, Band 1)
≤
–90 dBm (1.6 to 7.8 GHz, Band 1, RF ATT: 0 dB, Input: 50
Ω
termination)
50 MHz as reference
At input attenuator: 30 dB (High Power Input) or 10 dB (Low Power Input), temperature: 18 to 28
°
C
±
1.0 dB (1.6 to 7.8 GHz, Band 1)
At input attenuator: 20 to 82 dB (High Power Input) or 2 to 62 dB (Low Power Input),
±
2.0 dB (1.6 to 7.8 GHz, Band 1)
*After executing pre-select tuning.
≤
–90 dBc (0.8 to 3.9 GHz, Band 1, mixer input level: –10 dBm)
≥
0 dBm (1.6 to 7.8 GHz, Band 1)
≥
120 dB–0.8
×
f [GHz] dB (1.6 to 7.8 GHz, Band 1)
• Option 04: Digital resolution bandwidth
Resolution bandwidth (RBW)
Setting range:
10 Hz to 1 MHz (1-3 sequence)
Bandwidth accuracy:
±
10% (RBW
≥
100 Hz),
≥
10 % (RBW
≤
30 Hz)
Selectivity (60 dB : 3 dB):
≤
5:1 (RBW
≥
100 Hz),
≤
5:1 Nominal (RBW
≤
30 Hz)
RBW switching deviation: RBW 3 kHz as reference,
±
0.5 dB
Detection mode
Normal, Positive Peak, Negative Peak, Sample, RMS
RMS: Displays average value between samples.
Span setting Min. span: 1 kHz
Average noise level At RBW: 10 Hz, RF ATT: 0 dB
Level [Without Option 08]
MS8609A
≤
–136.5 dBm +1.5
×
f [GHz] dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–132.5 dBm +1.5
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–128.5 dBm Nominal (3.15 GHz to 7.8 GHz, band 1)
≤
–119.5 dBm Nominal (7.7 GHz to 13.2 GHz, band 2)
[With Option 08]
≤
–134.5 dBm + 1.8
×
f [GHz] dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–132.5 dBm + 1.8
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–128.5 dBm Nominal (3.15 GHz to 7.8 GHz, band 1)
≤
–119.5 dBm Nominal (7.7 GHz to 13.2 GHz, band 2)
MS8608A At input attenuator 20 dB
High Power Input [Without Option 08]
≤
–116.5 dBm +1.5
×
f [GHz]dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–112.5 dBm +1.5
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–112.5 dBm +0.8
×
f [GHz] dB Nominal (3.15 GHz to 7.8 GHz, band 1)
[With Option 08]
≤
–114.5 dBm +1.8
×
f [GHz] dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–112.5 dBm +1.8
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–112.5 dBm +0.8
×
f [GHz] dB Nominal (3.15 GHz to 7.8 GHz, band 1)
MS8608A At input attenuator 0 dB
Low Power Input [Without Option 08]
≤
–136.5 dBm +1.5
×
f [GHz] dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–132.5 dBm +1.5
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–132.5 dBm +0.8
×
f [GHz] dB Nominal (3.15 GHz to 7.8 GHz, band 1)
[With Option 08]
≤
–134.5 dBm +1.8
×
f [GHz] dB Nominal (1 MHz to 2.5 GHz, band 0)
≤
–132.5 dBm +1.8
×
f [GHz] dB Nominal (2.5 GHz to 3.2 GHz, band 0)
≤
–132.5 dBm +0.8
×
f [GHz] dB Nominal (3.15 GHz to 7.8 GHz, band 1)