Anritsu MS8608A, Operation Manual, Page: 6 / 338

For Safety
vi
CAUTION
This equipment uses a Poly-carbomonofluoride lithium battery to backup
the memory. This battery must be replaced by service personnel when
it has reached the end of its useful life; contact the Anritsu sales section
or your nearest representative.
Note: The battery used in this equipment has a maximum useful life of
7 years. It should be replaced before this period has elapsed.
This equipment uses memory cards as external storage media for
storing data and programs.
If this media is mishandled or becomes faulty, important data may be lost.
To prevent this chance occurrence, all important data and programs
should be backed-up.
Anritsu will not be held responsible for lost data.
Pay careful attention to the following points.
• Never remove the memory card from the instrument while it is being
accessed.
• The memory card may be damaged by static electric charges.
•
The back-up battery in SRAM memory cards has a finite life.
Replace the battery periodically. For details, refer to the explanation
on the memory card later in this manual.
• Anritsu has thoroughly tested all external storage media shipped with
this instrument. Users should note that external storage media not
shipped with this instrument may not have been tested by Anritsu, thus
Anritsu cannot guarantee the performance or suitability of such media.
This instrument is designed for an industrial environment.
In a residential environment this instrument may cause radio interference
in which case the user may be required to take adequate measures.
Replacing Memory
Back-up Battery
External
Storage Media
Use in a residential
environment