Anritsu MS8608A, Operation Manual, Page: 89 / 338

Section 5 Setting Functions
5-13
After the setting is completed, the set “Printer” or “BMP file to Mem Card” appears in
the square brackets [ ] in the “Copy to” field.
This item can also be set using the “Copy Cont” function explained in the paragraph
“Setting Print Destination”.
• Printer: Outputs a BMP file image to the printer.
• BMP file to Mem Card: Outputs a BMP file to the memory card.
Setting Printer Type (Printer setup)
Set the printer type to be used, as follows:
Step Procedure
1 Move the cursor to “Printer set up” using the Entry keys or the rotary knob.
2
Press the Set Entry key.
3
The selection window opens.
4 Move the cursor to “BJ-M70” or “HP 815C” using the keys or the rotary knob.
5 Press the Set key.
After the setting is completed, the set “BJ-M70” or “HP 815C” appears in the square
brackets [ ] in the “Printer set up” field.
This item can also be set using the “Copy Cont” function explained in “Setting Print
Destination”.
• BJ-M70: Sets the printer control to the ESC/P system.
• HP 815C: Sets the printer control to the HP system.