Anritsu MS8608A, Operation Manual, Page: 82 / 338

Section 5 Setting Functions
5-6
Inputting Title
After the title input screen is displayed, follow the steps below:
Step Procedure
1
Move the cursor to the character input position in the entry area by pressing the F1 (
←
) or
F2 (
→
) key.
2
Select the character to be input on the character table by moving the cursor using the
Entry keys or the rotary knob.
3 Confirm the selected input character by pressing F3 (Enter), then the confirmed character is
entered on the cursor position in the entry area.
4 To insert a character into the character string on the cursor position in the entry area, select the
desired character and press F4 (Insert).
5
Input a title by repeating Steps 2 to 4.
6 After the title input is completed, press the Set Entry key to go back to the Config screen
from the title input screen.
After the title setting is completed, the title appears in the square brackets [ ] in the
“Title” field.
On the title input screen, you can insert/delete characters or delete the whole title, as
follows.
F4 (Insert): The character at the cursor position on the character table is inserted at
the cursor position in the entry area.
F5 (Delete): The character at the cursor position in the entry area is deleted.
F6 (Clear): The whole character string displayed in the entry area is cleared.
Note:
If Cancel key is pressed instead of Set key in Step 6 above, the input title is
canceled and the screen returns to the Config screen.