Anritsu MS8608A, Operation Manual, Page: 87 / 338

Section 5 Setting Functions
5-11
Setting Start-up Screen (Screen)
Set the start-up screen, as follows:
Step Procedure
1 Move the cursor to “Screen” using the Entry keys or the rotary knob.
2 Press the Set Entry key.
3
The selection window opens.
4
Move the cursor to “Spectrum”, “System” or “Last” using the keys or the
rotary knob.
5
Press the Set key.
After the setting is completed, the set “Spectrum,” “System” or “Last” appears in the
square brackets [ ] in the “Screen” field.
• Spectrum: Always starts up in the Spectrum Analyzer screen when the power is
turned on.
• System: Always starts up in the Measurement System screen when the power is
turned on.
• Last: The screen (displayed immediately before the previous power off)
appears when the power is turned on.