ANISOPRINT Composer, User Manual, Page: 6 / 57

Composer User Manual
Parts marked with this symbol heat up to high temperature and may cause skin burns
Places of grounding connections
Areas of nono-protected contacts under voltage of 220-240V. WARNING: do not take off the protective
cover marked with this symbol
NOTE: please read this manual before using the printer. Keep this manual during the whole
period of operation of the equipment
CAUTION: the manufacturer reserves the right to introduce minor changes (not affecting safety requirements and
operation characteristics) in the design of the printer! Some design changes may not be covered by this user
manual
2.5. Compliance statement
The product is certified in accordance with the applicable technical regulations. The service life is 2 years from the
date of purchase provided the product is not used for anything other than the intended purpose according to the
rules and recommendations described
in this User Manual.
Product certificate: ?181299324
Certificate is valid: from 09.11.2018 through 08.11.2021
Product and services certification authority: Technický skúšobný ústav Pieš?any, š.p.
This equipment complies with Directive WEEE 2012/19/EU for disposal of electric and electronic equipment and
devices. This equipment must be disposed of in accordance with the applicable local waste and safety
regulations. To ensure safety when disposing the equipment it is necessary to follow generally accepted practices
for safe operation when disposing of equipment and devices.
3. Composite Fiber Co-extrusion
Composite Fiber Co-extrusion (CFC) is an additive manufacturing process for production of lightweight and strong
composite parts with a complex shapes and internal structures. The process is based on embedding continuous
composite fiber into the fused plastic through the use of a specially developed print head. The print head shown in
the figure below includes two extruders which are plastic (FFF) and composite (CFC). The composite extruder
6 / 57