ANISOPRINT Composer, User Manual, Page: 5 / 57

Composer User Manual
CAUTION: when connecting power cord to the power line, be sure that the printer ON/OFF switch is in <O>
position.
CAUTION: use the printer in ventilated locations.
CAUTION: the printer is a source of noise; do not use it in leisure areas.
NOTE: do not turn on the printer if the print head is disconnected!
NOTE:
place the printer on a level and rigid surface in order to ensure convenient and easy operation with all
elements.
NOTE: when in operations, do not place any objects inside the working zone and inside the printer; do not cover
the printer and the air vents.
NOTE:
if the printer is under warranty maintenance, it is not recommended to perform any repair independently!
NOTE: before the first operation be sure that all packaging materials are removed.
NOTE: do not use the printer without the glass at the buildplate!
2.3. Precautions when working with carbon fiber
CFC 3D printing implies work with carbon fiber. Please bear in mind that carbon fiber is a good electrical
conductor. The flow of current through carbon fiber leads to its instant ignition, which may result in injuries and
equipment failure.
WARNING: do not place the printer next to uncovered sockets and laboratory power supply sources in order to
avoid ignition of carbon fiber. Carbon fiber is a good electrical conductor.
If for some reason there occurred a breakage of the composite fiber, do not touch the place of the direct fracture
with unprotected skin. Carbon fiber consists of thousands of thin and sharp threads that can easily get stuck in the
skin, even intact fiber can sometimes cause splinters.
In case of fiber breaking small suspended particles may accidentally get into the eyes or respiratory system. If it is
necessary to examine the components of the Composer CFC Printer at a close distance, where carbon fiber is
outside the protecting tube, be sure to wear safety glasses and protecting mask.
WARNING: do not work with carbon fiber without personal protective equipment – gloves, safety glasses, and
mask.
2.4. Warning symbols
For safety reasons the following symbols can be found on the printer case.
5 / 57