ANISOPRINT Composer, User Manual, Page: 32 / 57

Composer User Manual
3. To finish the cleaning, feed about 50mm of plastic to the extruder.
8.3. Composite extruder channel cleaning
To prevent fiber clogging the extruder cleaning is recommended before each print. This will ensure the successful
printing of the parts without fiber clogging.
CAUTION: all extruder parts can be hot!
1. Heat composite extruder up to composite plastic printing temperature (or a bit higher). On the main screen
press Composite extruder temperature button and set required temperature.
32 / 57