ANISOPRINT Composer, User Manual, Page: 22 / 57

Composer User Manual
support.anisoprint.com (https://support.anisoprint.com/wp-content/uploads/2019/03/NozzleOffsetTest.gcode)
If the XY offsets are well-calibrated, the composite fiber is in the middle of the central cells, like it is shown in the
scheme
If the composite fiber deviates from the middle position of the central cells, like it is shown in the reference
scheme, you need to change your XY offsets values (i.e calibrate it)
In order to calibrate XY offsets, for every axis find the cell where the composite fiber is right in the middle as
shown on the reference scheme (right picture). XY adjustment value for each axis is written near the
corresponding cell. For the given example it is +0.3 for X offset and -0.4 for Y offset, which means that you need
22 / 57