ANISOPRINT Composer, User Manual, Page: 43 / 57

Composer User Manual
5. You can save the code by pressing the SAVE TO FILE button. If you want to change printing settings you
need to press the BACK button, change desired parameters and press the GENERATE button again.
You can find more detailed Aura overview and video tutorials on the website
anisoprint.com/aura/ (https://support.anisoprint.com/aura/)
10.3. System requirements
The recommended system configuration is the following:
DirectX 10 compatible graphics card, e.g. ATI Radeon 3000 series, Nvidia GTX 300 series
Display resolution 1920 x 1080
Intel Core i3 or AMD Athlon 64
400 MB hard disk space
8 GB RA
11. Troubleshooting
There are several issues that you may face in case of improper operating Composer 3D printers. If an issue
occurs, try to find it in the present Manual section and address it yourself.
11.1. The part get unglued from the buildplate during printing
1. Check whether the temperature of the buildplate matches the recommended buildplate temperature for the
plastic.
2. An insufficient amount of varnish/glue is applied to the buildplate surface. Increase the amount of
43 / 57