ANISOPRINT Composer, User Manual, Page: 28 / 57

Composer User Manual
7.10. WI-FI connection
In order to find out whether your printer supports Wi-Fi, you need to check the version of the printer (see MAIN
SCREEN). If the version contains “nw” letters – your printer supports Wi-Fi.
To connect your printer to Wi-Fi follow the instructions below.
1. Update your Composer firmware to version 1.2.0 or later. You can download the firmware from Anisoprint
Support Portal(https://support.anisoprint.com/composer/firmware-downloads/)
. On the \Guide page you can find instructions for firmware update.
2. Check the version of network bridge software (see MAIN SCREEN).
If the NW ver. is n/a please turn the printer off and on and wait for one minute (the network bridge
booting process takes about a minute after power on).
If the NW ver. is 0.1, please follow additional instructions marked with an asterisk. Also, please
update the Network software to the latest version.
3. To update the network bridge software to the latest version, see NETWORK BRIDGE SOFTWARE
UPDATING.
4. Go back to Menu from About Printer screen.
5. Go to Network -> Connections .
For NW v0.1: please wait for 10 seconds before pressing the «Choose Wi-Fi network» button. If the
list of networks is empty, please go back and try again.
6. Press Choose Wi-Fi network.
For NW v0.1: if the desired network is not on the first page, please wait for 10 seconds before
going to the next page by pressing the arrow on the right side of the screen.
28 / 57