ANISOPRINT Composer, User Manual, Page: 37 / 57

Composer User Manual
For this purpose, you need to lubricate the moving parts: guides of X, Y, Z axes, Z-axis screw, and the nozzle
switch mechanism. The delivery package includes special lubricants for all of these parts. Lubrication of
mechanical parts of the printer is recommended at least once every six months.
8.5. Keeping the printer clean
If you use the printer frequently, small particles of plastic and fiber may accumulate in the internal space. From
time to time clean the printer platform from accumulated particles and dust with a microfiber and a vacuum
cleaner.
The glass of the buildplate will inevitably accumulate particles of plastic and fiber, fixing varnish or glue. To
improve the adhesion of the part during printing and the quality of the first layers of the product, it is
recommended to clean the surface of the glass before each print with a damp cloth.
9. Printing materials
9.1. Plastics
There are two different plastics, included in the Delivery Package: Smooth PA and CFC PA. These plastics are
developed to be used in couple for the best performance. Although you can use these plastics in a combination
with other types of plastic in EXT and OPEN packs.
Smooth is branded thermoplastic polymer material based on polyamide PA12 filled with chopped carbon
fibers and developed by Polymaker especially for use with Anisoprint Composer 4/3. The material is intended
for 3D printing of secondary (unreinforced) zones of composite parts reinforced with continuous fibers and facing
surfaces. The material is supplied as filaments with cross-sectional diameter of 1.75 mm. Smooth features low
moisture absorption and makes use of anti-warping technology. Perfect surface quality and ease of use also
37 / 57