ANISOPRINT Composer, User Manual, Page: 36 / 57

Composer User Manual
5. Repeat points 3. – 4. until the needle is clean and the remains of the material stop pushing out of the inlet of
the extruder.
6. From the main screen go to Maintenance > Move > Extruders , change Step to 10 mm and feed 50 mm of the
composite plastic filament (press V+ button 5 times). You should see clean plastic exiting from the nozzle and
inlet.
8.4. Lubrication
To extend the service life of a Composer, mechanical parts of the product must be serviced on a regular basis.
36 / 57