ANISOPRINT Composer, User Manual, Page: 3 / 57

Composer User Manual
11.1. The part get unglued from the buildplate during printing
............................ 43
11.2. Plastic is not extruded from the nozzle
..................................................... 44
11.3. Fiber is not extruded from the nozzle
....................................................... 44
11.4. Strings and poor surface quality of printed part ......................................... 44
11.5. Plastic leaks out of the composite heat block inlet
..................................... 45
11.6. Fiber is clogged inside the composite extruder
......................................... 46
11.7. Fiber is clogged inside the cutter
............................................................. 50
11.8. Fiber is broken before the cutter in the PTFE guiding tube ........................ 54
3 / 57