ANISOPRINT Composer, User Manual, Page: 39 / 57

Composer User Manual
CAUTION: supply Smooth PA to the plastic extruder, CFC PA to the composite extruder
If you use the EXT pack, in addition to Smooth PA and CFC PA profiles you will be able to use plastics from the
following polymer families: PLA, PETG, PC, PA, ABS. There are material profiles in Aura available for them that
are thoroughly tested and provide stable excellent results.
OPEN material database package includes all materials from NEAT and EXT packages and contains elaborated
profiles for any plastic with a melting point below 270°C.
9.2. Reinforcing fiber
A specially prepared patented composite fiber Anisoprint CCF is used for
printing with reinforcement. It provides a high-quality adhesion to plastic. Anisoprint CCF is a composite
reinforcing fiber in the form of a tow made of thousands of ultrathin carbon monofilaments, impregnated with a
special polymer composition ensuring high-quality impregnation and adhesion between the polymers and the
fiber. Composite fiber is used to reinforce the plastic during the manufacturing of the part.
NOTICE: do not print with composite extruder without composite fiber. Otherwise, plastic leakage from the inlet
hole may occur.
39 / 57