ANISOPRINT Composer, User Manual, Page: 50 / 57

Composer User Manual
6. Repeat points 4. – 5. until the needle is clean and the remains of the material stop pushing out of the inlet
hole of the extruder.
7. From the main screen go to Maintenance > Move > Extruders , change Step to 10 mm and feed 50 mm of
the composite plastic filament (press V+ button 5 times). You should see clean plastic, exiting from the
nozzle and inlet.
11.7. Fiber is clogged inside the cutter
50 / 57