Angelo Po 0G0FR3E, Use And Installation Manual

Page: 33 / 85

C13143
000.
fm
- 15 -
IT
GB
DE
FR
ES
English
Important
Before it is put into service, the system
must be tested to check the operating con-
ditions of every single component and iden-
tify any malfunctions. In this stage, it is
important to check that all health and safety
requirements have been complied with in
full.
To test the system, make the following checks:
1 - check that the mains voltage is the same as that
of the appliance;
2 - operate the appliance's circuit-breaker to check
the electrical connection;
3 - check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
The appliance's main functions do not require any
special adjustments by specialist staff except the settings made during use by the user.
The appliance does not require the replacement of
operating components by specialist staff except the replacement of standard parts which can be carried
out by the user.
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work.
Never dump non-biodegradable materials, lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
TESTING OF THE APPLIANCE
ADJUSTMENTS 8
ADJUSTMENTS PROCEDURE
REPLACING PARTS 9
REPLACE PROCEDURE
DECOMMISSIONING THE APPLIANCE
C13143000.fm Page 15 Thursday, June 12, 2008 2:23 PM