Angelo Po 0G0FR3E, Use And Installation Manual

Page: 22 / 85

- 4 -
C13143
000.
fm
IT
GB
DE
FR
ES
English
See tables and “Connection chart” at the back of the
manual.
Although the appliance is complete with all safety
devices, during installation and connection addition-
al devices must be added if necessary to comply
with the relevant legal requirements.
A)Safety thermostat
: cuts off the electricity supply
in case of overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
TECHNICAL DATA
SAFETY DEVICES
The illustration shows the position of the signs
provided.
A)Nameplate with manufacturer and appli-
ance data.
B)General hazard:
read the manual carefully
before carrying out any procedure.
C)General hazard:
when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard:
all relevant regulations must be
complied with. "Install in compliance with the relevant
regulations and use in well ventilated premises only".
E)General hazard:
all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
F) Burn hazard:
watch out for hot surfaces.
G)CE marking:
indicates that the appliance is compli-
ant with the relevant norms.
H)WEEE symbol:
indicates that the appliance is sub-
ject to specific waste disposal regulations.
SAFETY AND INFORMATION SIGNS
Comes complete with the following:
A)
Well lid.
B)
Basket.
STANDARD ACCESSORIES
IDM-39604001500.tif
A
A
IDM-39604001600.tif
A
B C
D
E
F
G
H
A
B
IDM-39604000300.tif
C13143000.fm Page 4 Thursday, June 12, 2008 2:23 PM