ADV8005 Hardware Reference Manual
UG-707
tx1_inp_sel[3:0]
, IO Map,
Address 0x1A03[7:4]
This signal is used to select the video source for the HDMI Tx1.
Function
tx1_inp_sel[3:0]
Description
0x00 (default)
From Primary Input Channel
0x01
From Primary VSP
0x02
From PtoI Converter
0x03
From Internal OSD Blend 1
0x04
From Secondary VSP/PtoI Converter
0x05
From Secondary Input Channel
0x06
From RX Input
0x07
From Internal OSD Blend 2
tx2_inp_sel[3:0]
, IO Map,
Address 0x1A03[3:0]
This signal is used to select the video source for the HDMI Tx2.
Function
tx2_inp_sel[3:0]
Description
0x00 (default)
From Primary Input Channel
0x01
From Primary VSP
0x02
From PtoI Converter
0x03
From Internal OSD Blend 1
0x04
From Secondary VSP/PtoI Converter
0x05
From Secondary Input Channel
0x06
From RX Input
0x07
From Internal OSD Blend 2
hd_enc_inp_sel[3:0]
, IO Map,
Address 0x1A04[7:4]
This signal is used to select the video source for the HD encoder. When using the encoder in SD only mode, this signal must be set to the
same value as sd_enc_inp_sel.
Function
hd_enc_inp_sel[3:0]
Description
0x00 (default)
From Primary Input Channel
0x01
From Primary VSP
0x02
From PtoI Converter
0x03
From Internal OSD Blend 1
0x04
From Secondary VSP/PtoI Converter
0x05
From Secondary Input Channel
0x06
From RX Input
0x07
From Internal OSD Blend 2
sd_enc_inp_sel[3:0]
, IO Map,
Address 0x1A04[3:0]
This signal is used to select the video source for the SD encoder. When using the encoder in SD only mode, hd_enc_inp_sel must be set to
the same value as this signal.
Function
sd_enc_inp_sel[3:0]
Description
0x00 (default)
From Primary Input Channel
0x01
From Primary VSP
0x02
From PtoI Converter
0x03
From Internal OSD Blend 1
0x04
From Secondary VSP/PtoI Converter
0x05
From Secondary Input Channel
0x06
From RX Input
0x07
From Internal OSD Blend 2
Rev. A | Page 43 of 317
