UG-707
ADV8005 Hardware Reference Manual
1.2.
MAIN FEATURES OF THE
1.2.1.
Video Signal Processor
1.2.1.1.
Primary VSP
•
12-bit internal processing
•
Fixed frame latency capability
•
Input timing up to 1080p
•
Output timing up to 4k x 2k
•
Input/output format YCbCr at 4:4:4
•
Motion adaptive de-interlacing with motion detection
•
Ultra low angle interpolation on edge regions of interlaced video
•
Cadence detection (any cadence detection possible)
•
Progressive cadence supported
•
Super resolution video scaler
•
Aspect ratio conversion/panorama scaling
•
Arbitrary upscaling and downscaling for both horizontal and vertical direction
•
Sharpness detail and edge enhancement
•
Noise reduction for random, mosquito, and block noise
•
Frame Rate Conversion
•
Color Upsampling Error (CUE) correction
•
Progressive to interlaced (PtoI) converter
•
Game mode supported
•
Album mode supported
•
Demo window
1.2.1.2.
Horizontal Pre-Scaler
•
8-bit internal processing
•
Downscales video standards of greater than 162MHz and/or more than 2048 pixels/line
1.2.1.3.
Secondary VSP
•
8-bit internal processing
•
Input and output timing up to 1080p
•
Input and output format YCbCr at 4:4:4
•
Up-scaling and down-scaling for both horizontal and vertical direction
•
Aspect ratio conversion and panorama scaling
•
Frame Rate Conversion
•
Progressive to interlaced (PtoI) converter
1.2.2.
OSD
•
Internally generated bitmap based OSD allowing overlay of bitmap images on one or more video outputs
•
Dual video paths through the OSD blend block to support dual zone OSD
•
Dedicated OSD scaler – allows OSDs to be rendered at a single resolution reducing external memory bandwidth
•
Blending onto 3 GHz video formats
•
Pixel-by-pixel alpha blending of OSD data on video data
•
Option of externally generated OSD
•
OSD can be overlaid in the main 3D video format timings
•
Blimp OSD
software tool and provided ANSI-C libraries cover the full design flow of any OSD
Rev. A | Page 20 of 317
