UDM-RX02N Multi-Format Receiver
40
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Configuration Options
The UDM-RX02N is configured via the UDM Hub that it is connected to, via NetLinx Studio or via serial
commands. Refer to the UDM-RX02N NetLinx Programming section on page 49 for details.
The UDM-RX02N will appear in NetLinx Studio’s Online Device Tree as being connected to the UDM Hub
(see Device Numbering section on page 13 for details).
By default, the UDM-0808-SIG is assigned device # 05600.
By default, the UDM-RX02N is assigned device # 0560X, where X is the port number used by each
UDM-RX02N.
UDM-RX02N Specifications (Cont.)
Serial (RJ12) port:
Provides bi-directional serial control of remote devices.
It Also allows administrators to control the various functions to the UDM-
RX02N from a command line prompt and terminal connection.
• Requires a DB9-to-RJ12 adapter cable (FG-RS01) to connect to a PC.
• See the
Serial Control Considerations With UDM-0808 and UDM-
section on page 56 for details.
IR Rx (3.5mm) Port:
3.5mm input port, for connection of an IR receiver to allow setup of the UDM-
RX02N, local compensation controls, and remote control of centrally located
IR devices.
IR Tx (3.5mm) Port:
3.5mm IR Transmitter output port allows one IR-controlled device (such as a
DVD or VCR player) to be controlled via optional wired IR emitter.
Audio Connectors:
• Black RCA female connector - Digital audio
• White RCA female connector - Analog audio Left
• Red RCA female connector - Analog audio Right
Video Connectors:
• Yellow RCA female connector - CVBS (supports composite video)
• S-Video - S-video female connector
• VGA - HD15 female connector (supports VGA video)
• Green/Blue/Red RCA female connectors - Component outputs: Y/Pb/Pr
Operating Environment:
• 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):
1" x 8 15/16” x 3 3/8” (25 mm x 227 mm x 85 mm)
Weight:
1.45 lb. (658 g)
Certifications:
• CE
• FCC part 15 Class A
Included Accessories:
UDM-PS 24VDC, 750mA Power Supply (FG-UDM-PS)
Note
: No A/V interface cables supplied.
Other AMX Equipment:
• RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RC05 Multi-Format IR Remote Control (FG-UDM-RC05)
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
When adding a UDM Hub to a system, it is highly recommended that you reserve the
next eight device numbers (by default, these would be 05601 - 05608), to
accommodate having an UDM-RX02N connected to each of the eight UDM ports on
the Hub. This will help to avoid overlapping device numbers in the event that
additional RX02Ns are added to the system later.
