![background image](http://html.mh-extra.com/html/amx/udm-rx02n/udm-rx02n_operation-reference-manual_2938757091.webp)
Cascading Hubs
81
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Cascading Two Hubs - Cable Connections
1.
Attach one end of the UDM Cascade cable to the CASCADE OUT port on the Source Hub. The Source
Hub provides the video source that will be cascaded to the Target Hub (FIG. 71).
2.
Attach the other end of the UDM Cascade cable to the CASCADE IN port on the Target Hub, which will
transmit this cascaded video source to a display device (via a UDM-RX02N receiver), or to another Hub
if using more than 2 hubs for cascading (see the Cascading up to Four Hubs - Cable Connections section
on page 81).
Cascading up to Four Hubs - Cable Connections
1.
Cascade A/V inputs from the Source Hub to the first Target Hub (Target Hub #1 in FIG. 72):
a.
Attach one end of the UDM Cascade cable to a CASCADE OUT port on the Source Hub
(1-4, 5-8, or both).
b.
Attach the other end of the UDM Cascade cable to the matching CASCADE IN port on
Target Hub #1.
2.
Cascade A/V inputs from Target Hub #1 to Target Hub #2:
a.
Attach one end of the UDM Cascade cable to a CASCADE OUT port on Target Hub #1
(1-4, 5-8, or both).
b.
Attach the other end of the UDM Cascade cable to the matching CASCADE IN port on
Target Hub #2.
3.
Cascade A/V inputs from Target Hub #2 to Target Hub #3:
a.
Attach one end of the UDM Cascade cable to a CASCADE OUT port on Target Hub #2
(1-4, 5-8, or both).
b.
Attach the other end of the UDM Cascade cable to the matching CASCADE IN port on
Target Hub #3..
FIG. 71
Two Cascaded UDM-0808-SIG Hubs
Source Hub
Target Hub
CASCADE OUT 5-8 on Source Hub
to
CASCADE IN 5-8 on Target Hub
CASCADE OUT 1-4 on Source Hub
to
CASCADE IN 1-4 on Target Hub
IN
OUT
IN
OUT
IN
OUT
IN
OUT