![background image](http://html.mh-extra.com/html/amx/udm-rx02n/udm-rx02n_operation-reference-manual_2938757041.webp)
UDM-0808-SIG WebConsole
31
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Clock Manager - Mode Manager
Select the main Clock Manager entry in the Admin Menu, or select Mode from the Clock Manager sub-menu,
and the Mode Manager page will be displayed (FIG. 26):
The options on the Mode Manager page provide inputs for selecting the current mode of the system time:
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
FIG. 25
Clock Manager options
FIG. 26
Clock Manager - Mode Manager page
Time Sync:
Use the radio buttons to select either
Network Time
or
StandAlone
.
Note
: If using StandAlone mode, the time will be valid only until the unit is
rebooted. Once the unit is rebooted, the time will be lost, and will have to be
reset.
Note that the
Daylight Savings
and
NIST Servers
tabs are enabled only if
Net-
work Time
is selected as the mode.
Re Sync Period:
Select the desired re-synch period for the clock from this drop-down menu. Re-
synch period options include 5 minutes, 15 minutes, 1, 2 and 4 hours
(default = 1 hour).
Timezone:
Select the appropriate Time Zone from the drop-down menu.
Date:
Use these fields to manually enter today’s date (mm/dd/yyyy).
Time:
Manually enter the current time (hh:mm:ss).
Accept:
Click to save changes. Changes on this page take effect immediately.
Cancel:
Click to exit this page without saving any changes.