![background image](http://html.mh-extra.com/html/amx/udm-rx02n/udm-rx02n_operation-reference-manual_2938757052.webp)
UDM-RX02N Wiring and Connections
42
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
UDM HUB (RJ-45) Port
The following table provides detailed pinout information for the UDM port:
Connecting the UDM-RX02N to a UDM-0808-SIG Hub
The UDM-0808-SIG Hub features eight UDM OUTPUT RJ45 connectors, each of which support one UDM-
RX02N. The UDM-RX02N will then be connected to a display device.
1.
Connect a UTP patch cable to the appropriate UDM OUTPUT RJ45 connector. The UDM-0808-SIG is
marked with the port number for each output (1- 8).
2.
Connect the other end of the UTP patch cable to the UDM HUB port on the UDM-RX02N.
3.
When the power is switched on, two LEDs will be visible at the UDM HUB port:
UDM Port LEDs
2 LEDs are visible at the UDM HUB port on the UDM-RX02N, when the Hub is switched on:
Green - Audio/Control Communication from UDM Hub (if UTP patch cable is removed, LED
switches off)
Amber - Power
A/V Transmission Over UTP (UDM)
RJ45
Pin #
568A
Termination
A/V Signals
568B
Termination
Color
Pair #
RGB
YPbPr
CVBS
S-Video
Color
Pair #
1
3
Red +
Y +
CVBS S1 +
Y +
2
2
3
Red -
Y -
CVBS S1 -
Y -
2
3
2
Blue +
Pr +
CVBS S3 +
C +
3
4
1
Green +
Pb +
CVBS S2 +
1
5
1
Green -
Pb -
CVBS S2 -
1
6
2
Blue -
Pr -
CVBS S3 -
C -
3
7
4
Audio, Data, Power +
Audio, Data, Power +
Audio, Data, Power +
Audio, Data, Power +
4
8
4
Audio, Data, Power -
Audio, Data, Power -
Audio, Data, Power -
Audio, Data, Power -
4
FIG. 35
UDM-0808-SIG - UDM OUTPUT connectors
FIG. 36
UDM-RX02N Hub and Serial Ports
UDM OUTPUT Ports 1-8 (RJ45)
UDM-0808-SIG
(rear panel)
UDM HUB Port