UDM-0808-SIG WebConsole
32
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Clock Manager - Daylight Savings
Select Daylight Savings from the Clock Manager sub-menu (or from the main Clock Manager page), and the
Daylight Savings Manager page will be displayed (FIG. 27):
Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).
The options on this page allow you to enable and disable daylight savings, and specify daylight savings start
and end times.
FIG. 27
Clock Manager - Daylight Savings Manager page
Daylight Savings:
Use these radio buttons to turn daylight savings time on and off
(default = Off).
Offset:
Use these drop-down menus to specify the amount of time to offset the clock
for daylight savings.
Starts:
These options allow you to specify when to start using daylight savings time.
Select a month and time to start from the drop-down menus.
• Select
Fixed
to start daylight savings at a specific Day, Month and Time (an
additional field for
Day
is provided when this radio button is selected).
• Select
Occurrence
to start daylight savings at a specified occurrence
(additional fields for
Week of the Month
, and
Day of the Week
are
provided).
Ends:
These options allow you to specify when to stop using daylight savings time.
Select a month and time to start from the drop-down menus.
• Select
Fixed
to end daylight savings at a specific Day, Month and Time (an
additional field for
Day
is provided when this radio button is selected).
• Select
Occurrence
to end daylight savings at a specified occurrence
(additional fields for
Week of the Month
, and
Day of the Week
are
provided).
Accept:
Click to save changes. Changes on this page take effect immediately.
Cancel:
Click to exit this page without saving any changes.
