UDM-0808-SIG WebConsole
30
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Port Settings
Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 23). Use the
options on the page to specify various Port settings for this UDM-0808-SIG.
The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP
ports, and allow you to change each port number from it’s standard default assignment.
Clock Manager
Hover the cursor over the Clock Manager option in the Admin menu to open the Clock Manager sub-menu
(FIG. 24).
Each of the options listed in the submenu are also accessible via options on the Clock Manager page (FIG. 25).
FIG. 23
Port Settings page
HTTP Port Number:
Default = enabled, default port number = 80.
HTTPS Port Number:
Default = enabled, default port number = 443.
Telnet Port Number:
Default = enabled, default port number = 23.
SSH Port Number:
Default = enabled, default port number = 22.
FTP Port Number:
Default = enabled, default port number = 21.
Restore Factory Defaults:
Click to restore all Port settings to the factory defaults.
Accept:
Click to save changes. Note that Port Settings changes require a
reboot (see below).
Cancel:
Click to exit this page without saving any changes.
Reboot:
Click to initiate a system reboot. Port settings changes only take
effect after a reboot.
FIG. 24
Clock Manager sub-menu
