UDM-0808-SIG NetLinx Programming
15
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
SEND_COMMANDs
All text is based on a Unicode index.
UDM-0808-SIG SEND COMMANDs
"'?FWVERSIOND'"
Returns the firmware
version of various
Hub components.
Syntax:
SEND_COMMAND <DEV>, "'?FWVERSIOND<D#>'"
Variables:
• D# = Hub component description:
"MAIN",
"PORT",
"INPUT",
"AUX",
Return Value:
"FWVERSION-<version>"
If the D and component description is omitted then the command will return the
version number of the Hub.
"'?TEMP'"
Returns internal
temperature in
degrees (Celsius).
Syntax:
SEND_COMMAND <DEV>,"'?TEMP""
Example:
SEND_COMMAND dvUDM,"'?TEMP'"
Return value:
"TEMP-<temperature>"
"'AI"'
Connect audio inputs
to outputs.
Syntax:
SEND_COMMAND <DEV>,'"AI<I#>O<O#>"'
Variables:
• I# = input number - initial 'I' may be omitted if desired
1-8 = Inputs A-H - a value of 0 means no input (disconnect)
• O# = output port number:
1-8 = Outputs 1-8 - a value of 0 or "ALL" means all outputs
Example 1:
SEND_COMMAND dvUDM,'"AI4O4,5,6"'
Connect input D audio to outputs 4, 5 and 6.
Example2:
SEND_COMMAND dvUDM,'"A0O1,4,5"
Disconnect audio from outputs 1,4 and 5.
