UDM-RX02N IR File Transfers
64
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Use this tab if the file(s) you want to transfer are not included in the open Workspace. This tab consists of
a display of the different types of files that can be transferred to the Master or System devices on the bus.
3.
Select the type of file (in this case, IRL/IRV Files) that you want to add to the Transfer List.
4.
Click the Add button. This invokes the Open dialog, with the Files of Type selection already set to "IR
Files (*.irl, *.irv)".
5.
Locate and select the IR file that you want to add.
6.
Click Open.
a.
If the selected file has not been mapped to a device, the Enter Device Mapping Information dialog is
b.
Enter the device mapping information, and click OK to return to the Select Files For File Transfer
dialog.
IR Files are sent to Port 3 (IR Device Port) on the RX02Ns.
Refer to the Device Numbering section on page 49 for information on device numbering for UDM-
RX02Ns.
Use the Online Device Tree to determine the device's assigned ID, if it has been changed.
7.
At this point, the selected IR File and it’s mapping information is indicated in the File list (FIG. 58):
FIG. 56
Select Files for File Transfer dialog (NetLinx Studio)
FIG. 57
Enter Device Mapping Information dialog (NetLinx Studio)
5601
3
