AMX UDM-RX02N Operation/Reference Manual Download | Manualshive

Page: 59 / 96

background image

UDM-RX02N NetLinx Programming

49

UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide

UDM-RX02N NetLinx Programming

Overview

There are a select number of NetLinx CHANNELs, LEVELs and SEND_COMMANDs recognized by the
UDM-RX02N.

NetLinx programming is supported only if the UDM-RX02N is connected to the UDM-0808-SIG Hub (a
native NetLinx device).



The main Device SEND_COMMANDs are described on page 50.



IR SEND_COMMANDs are described on page 52.



Serial SEND_COMMANDs are described on page 55.

Device Numbering

In NetLinx Studio’s online device tree, the UDM-0808-SIG is listed as a device with a single port, and each
UDM-RX02N receiver connected to the Hub is listed as a separate device immediately following the Hub (the
default device number for the UDM-0808-SIG is 05600 - refer to the Device Numbering section on page 13 for
details).

Note that the device number for each UDM-RX02N currently connected to the UDM-0808-SIG Hub is
automatically designated a device number, based on the device number of the Hub to which it is connected,
and the number of the UDM OUTPUT port on the Hub (1-8) to which it is physically connected.

Therefore, it important to avoid assigning device numbers that will conflict with this auto-numbering scheme.
Reserve the eight device numbers following the UDM Hub’s device number assignment for up to eight UDM-
RX02Ns.

In NetLinx Studio’s online device tree, each UDM-RX02N receiver shows three ports (FIG. 51)

These three ports relate directly to the three types of NetLinx commands recognized by the UDM-RX02N:



Port 1 - SEND_COMMANDS/LEVELS (Video Control and IR Receive)



Port 2 - SERIAL (RS232) SEND_COMMANDS



Port 3 - IR SEND_COMMANDS (IR Output)

Only RX units that are physically connected to the Hub will be represented in the
Online Tree.

FIG. 51

NetLinx Studio Online Tree - Ports 1-3 on each connected UDM-RX02N

Ports 1-3 on UDM-RX02N
(device number 06929)

Ports 1-3 on UDM-RX02N
(device number 06931)

Ports 1-3 on UDM-RX02N
(device number 06933)

Port 1 - main device port
Port 2 - Serial (RS232) port
Port 3 - IR device port

«
...
57
58
59
60
61
...
»

Summary of Contents for UDM-RX02N

































































































Reviews:

No comments

Related manuals for UDM-RX02N

Brand: Eclipse Pages: 101

Brand: Eclipse Pages: 8

Brand: Harman Kardon Pages: 4

Brand: JBL Pages: 6

Brand: Mammut Pages: 40

Brand: NAD Pages: 2

Brand: Uniden Pages: 17

Brand: Yaesu Pages: 80

Brand: Kathrein Pages: 64

Newcastle VR-654BD

Brand: Sherwood Pages: 62

Brand: Jensen Pages: 12

Brand: RF-Link Pages: 4

Brand: ZGEMMA Pages: 31

Brand: Arris Pages: 24

Brand: Skymaster Pages: 28

Brand: Grandbeing Pages: 25

Brand: AMC Pages: 4

Brand: Galaxy Innovations Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands