background image

www

.ledix.pl

2-channel radio

flush receiver

ROP-03

Zamel Sp. z o.o.

PL 43-200 Pszczyna, ul. Zielona 27, Poland

tel: +48 32 449 15 00, fax: +48 32 449 15 02

e-mail: [email protected]www.ledix.pl

10÷14 V DC / 0,7 W; IP20

weight: 36 g

Declaration of Conformity is on www.ledix.pl

2-channel radio flush receiver

ROP-03

The symbol means selective collecting of electrical and electronic equipment.

It is forbidden to put the used equipment together with other waste.

ROP-03 receiver is designed to carry out simple control functions in the low-voltage instal-

lations from 10 ÷ 14 V DC. In connection with EXTA FREE system transmitters it enables the 

realisation of the switch on/switch off function, the monostable mode, the bistable and 

time modes. The receiver is recommended for use with LED diode lighting.

Characteristic features:

•  cooperation with wireless EXTA FREE system transmitters,

•  independent control of up to two receivers in the following modes: switch on/switch off, 

monostable, bistable, time,

•  2 relay potential free outputs (NO) with a maximum capacity of 5 A for 250 V AC,

•  wide operation range (up to 230 m outdoors),

•  small dimensions - suitable for mounting in a typical Ø60 junction box,

•  low power consumption in the standby mode (0.15 W) - the receiver is used to a continu-

ous operation.

Mounting in a Ø60 

junction box

Mounting

indoor only

Co-operation 

with EXTA FREE 

transmitters

ROP-03 ENG  Ver. 01

SCAN

the technical

data

10 

÷

 14 V DC

CET Lighting Sp. z o.o. declares that the equipment complies with the principal requirements 

and other applicable rules of the RTTE Directive.

Summary of Contents for ROP-03

Page 1: ...on the monostable mode the bistable and time modes The receiver is recommended for use with LED diode lighting Characteristic features cooperation with wireless EXTA FREE system transmitters independent control of up to two receivers in the following modes switch on switch off monostable bistable time 2 relay potential free outputs NO with a maximum capacity of 5 A for 250V AC wide operation range...

Page 2: ...on box The product belongs to the ECOLINE group and is characterised by low power consumption The features of the controller cooperation with wireless EXTA FREE system transmitters realisation of the control function in low voltage installations including LED diode lighting two output relays dry contacts the possibility of independent control of two circuits multiplicity of operation modes switch ...

Page 3: ... switches on first signal pulsates next the signal is constant Wait for the third time about 5 seconds until LED red diode switches on first signal pulsates next the signal is constant After the adjusted time is finished the number of LED red diode flashes press PROG push button and then release it TIME IS ADDED After the adjusted time is finished the number of LED red diode flashes press PROG pus...

Page 4: ...t signal Next release PROG push button Press PROG push button of ROP 03 device for a longer time until LED red diode switches on constant signal Next release PROG push button Press the transmitter s push button for a longer time Release the transmitter s push button LED red diode switches on first the signal pulsates next the signal is constant Press the same transmit ter s push button and release...

Reviews: