Touch Panel Accessories
32
12” and 15” Modero Touch Panels
Reading NXT-CHG LED Indicator
FIG. 32 shows the components on the NXT-CHG Smart Battery Charger.
There is one LED indicator on the front of each battery slot that indicates the status of that slot. The blink
patterns for these LEDs are described below:
Charging the NXT-BP batteries using the NXT-CHG
1.
Review the
Checking the NXT-BP battery charge
section on page 28 to confirm the percentage of charge
remaining on the batteries.
2.
Provide power to the charger (as outlined in the
Powering the NXT-CHG
section on page 31).
3.
Align the battery connector with the corresponding charge slot within each of the two
NXT-CHG slots.
4.
Firmly insert the battery into the desired slot until the battery is both securely located within the slot and
there is activity from the corresponding Slot LED. Refer to the
Reading NXT-CHG LED Indicator
section
on page 32 section for LED information.
Recalibrating the batteries
The recalibration process increases the accuracy of the battery charge level. Recalibration of the batteries is
only done upon request from the Modero on-screen Battery Base page. Refer to the
Battery Base Page
section
on page 89 for more detailed Battery Base page information.
1.
Place the selected battery securely into Slot 1 (left slot) until there is activity on the
Slot 1 LED.
2.
Push the
Recalibration
pushbutton (located between the two slots) to initiate recalibration in the left bay
only.
FIG. 32
Component locations on the NXT-CHG
•
Off
:
No battery detected.
•
Green Flashing
: Fast
charging.
•
Green Solid
: Fully
charged.
•
Yellow Flashing
: Recalibration in process.
•
Yellow/Green
: Recalibration
complete.
•
Yellow Solid
:
Standby (waiting for other battery to charge).
•
Red Flash
:
Error (problem with either the battery connection to the internal slot, or with
the battery itself).
Slot 1
LED
Slot 2
LED
Recalibrate
Pushbutton
Slot 1
Slot 2
(recalibration)
Recalibration can only be done with Slot 1 on the NXT-CHG.
