Touch Panel Accessories
12
12” and 15” Modero Touch Panels
Installing the NXA-AVB Breakout Box
A PSN power supply can indirectly provide power to a Modero panel by routing power through the NXA-AVB
Breakout Box. FIG. 6 shows a sample wiring configuration using both an indirect or direct PSN power
connection for a video-capable Modero panel.
When used with CA (Non-Video) Modero panels, the NXA-AVB
only
transfers Audio signals between the
Breakout Box and the panel. A PSN power supply can also directly provide power through the unit to a target
Modero panel, as shown in FIG. 7.
Use a standard CAT5 Ethernet cable (connected to the rear of the Table Top Panel or to the side of the Wall
Panel) to provide both communication and 10/100 network connectivity between the panel, NXA-AVB,
NetLinx Master, and the network.
NXA-AVB Specifications (Cont.)
Front Components:
• 2-pin 3.5 mm Phoenix connector for power to the touch panel
• RJ-45 connector that provides ICSNet signals to the touch panel
• RJ-45 connector that provides the differential audio and video signals to/from the
touch panel (panel type dependant)
Rear Components:
• 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio
• 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio
• BNC connector (female) for Composite or Chroma (
for video-capable panels only
)
• BNC connector (female) for luminance (
for video-capable panels only
)
• RJ-45 connector for ICSNet input from the control system
• 2-pin 3.5 mm Phoenix connector for in-bound power
Included
Accessories:
• Two 2-pin Phoenix connectors (41-5025)
• 4-pin Phoenix connector (41-5047)
• 6-pin Phoenix connector (41-5063)
• Rack Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
Other AMX
Equipment:
• AC-RK Accessory RackMount Kit (
FG515
)
• Modero Table Top Cable (CA2250-50)
• PSN4.4 power supply (
FG423-45
)
• PSN6.5 power supply (
FG423-41
)
FIG. 6
Sample wiring configuration using CV Modero panels
NXD/T Color Video (CV)
ICSNet In
PSN power
(RJ-45)
Video In
(BNC)
Mic Out
(4-pin captive-wire)
Audio In
(6-pin captive-wire)
NXA-AVB
PSN4.4/PSN6.5
supplied via
NXA-AVB box
ICSNet
(CAT5)
Audio/Video
(CAT5)
Line Level out
(to amplifier
or VOL card)
Touch Panels
or
Direct
Connect
Breakout Box
Ethernet
(front)
(rear)
(CAT5)
or
supply
PSN power
supply
