Firmware Pages and Descriptions
100
12” and 15” Modero Touch Panels
Secondary Connection Page Elements
Back:
Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:
This visual display of the connection status allows the user to have a current
update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (
requiring a username and password
).
IP Settings:
Sets the IP communication values for the touch panel and contains:
DHCP/STATIC
Sets the panel to either DHCP or Static communication modes.
•
DHCP (Dynamic Host Configuration Protocol)
assigns IP Addresses to client
stations logging onto a TCP/IP network from a DHCP server.
•
Static IP
is a permanent IP Address that is assigned to a node in a TCP/IP
network.
Note:
If DHCP is selected, the following fields become read-only: IP Address,
Subnet Mask, Gateway, Primary DNS, Secondary DNS, and Domain.
IP Address
Sets the secondary IP Address assigned to the panel.
Subnet Mask
Sets a subnetwork address to the panel.
•
Subnetwork mask
is the technique used by the IP protocol to filter messages
into a particular network segment (subnet).
Gateway
Sets a gateway value to the panel.
•
Gateway
is a computer that either performs protocol conversion between
different types of networks/applications or acts as a go-between for two or
more networks that use the same protocols.
Host Name
Sets the host name of the panel.
• PRIMARY DNS sets the address of the primary DNS server being used by the
Modero panel for host name lookups.
-
DNS (Domain Name System)
is software that lets users locate computers
on a local network or the Internet (TCP/IP network) by host and domain. The
DNS server maintains a database of host names for its’ domain and their
corresponding IP Addresses.
• SECONDARY DNS sets the secondary DNS value to the panel.
Primary DNS
Sets the address of the primary DNS server used by the panel for host name
lookups.
Secondary DNS
Sets the secondary DNS value to the Modero panel.
Domain
Sets the unique name on the Internet to the panel for DNS look-up.
MAC Address
This value is factory set by the manufacturer of the wireless Ethernet PCMCIA
card.
Access Point MAC Address: This value is factory set by the manufacturer of the Wireless Access Point
(WAP).
When communicating with a WAP200G enter the MAC Address (
BSSID
) of the
target WAP as the Access Point MAC Address. Refer to the
WAP200G
Instruction Manual
for more detailed information on the interaction between
these two product lines.
Wireless Settings:
Sets the communication values for the PCMCIA NXA-WC80211b wireless
communication card inserted into the rear/side of a Modero panel.
Network Name (SSID)
Provides the Service Set Identifier (SSID), required by the panel, before it is
permitted to join the wireless network. The SSID is the unique name used on
the WAP and assigned to all panels in a wireless network that are communicat-
ing to the same target WAP.
This field can not be blank.
• It is case sensitive and must not exceed 32 characters, which may be any
keyboard character. Make sure this setting is the same for all points in your
wireless network.
• This unique string identifies the network and is the same string for all users on
the same network.
