Introduction
7
12” and 15” Modero Touch Panels
Specifications for Color Video Touch Panels (Cont.)
12" Panel LCD Parameters:
• Brightness (luminance): 250 cd/m
2
• Channel transparency: 8-bit Alpha channel transparency
• Contrast ratio: 300:1
• Display area (HW): 183.10 mm x 247.40 mm
• Display colors: 256K (18-bit color depth)
• Dot/Pixel pitch: 0.297 mm
• Screen resolution (HV): 800 x 600 pixels
• Video formats: NTSC, PAL, and SECAM (shown within variable-size
video windows)
• Viewing angles (160° total viewing angle):
Horizontal: + 80° (left and right from center)
Vertical: + 80° (up and down from center)
15" Panel LCD Parameters:
• Brightness (luminance): 400 cd/m
2
• Channel transparency: 8-bit Alpha channel transparency
• Contrast ratio: 300:1
• Display area (HW): 304.13 mm x 228.10 mm
• Display colors: 16 million colors (24-bit color depth)
• Dot/pixel pitch: 0.297 mm
• Screen resolution (HW): 1024 x 768
• Video formats: NTSC, PAL, and SECAM (shown within variable-size
video windows)
• Viewing angles (170° total viewing angle):
Horizontal: + 85° (left and right from center)
Vertical: + 85° (up and down from center)
Supported Audio Sample Rates:
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
11025Hz, and 8000Hz.
Button Assignments:
Button assignments can only be adjusted in TPD4 and not on the panels.
• Button channel range: 1 - 4000 button push and Feedback (per address
port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
Front Panel Components:
Light sensor:
• Photosensitive light detector for automatic adjustment of the panel
brightness (a dim room results in a dimmer LCD display and a bright
room results in a brighter LCD display).
Note:
The light sensor can be adjusted via the Sensor Setup page
(page 95).
Motion sensor (PIR):
• Proximity Infrared Detector to wake the panel when the panel is
approached.
• Activation range: + 20° vertically from center and + 45° horizontally
from center.
Note:
The motion sensor can be adjusted via the Sensor Setup page
(page 95).
Front setup access button:
• Provides both access to the Setup and Calibration pages and toggles
the panel between a "sleep" and "wake" state.
- When wired, "sleep" status means the backlight is Off.
- When battery operated, wireless "sleep" status means the touch panel
base is either Off or "suspended".
Microphone:
• Used for intercom applications (
requires an optional NXA-AVB
Breakout Box
).
Speakers:
• Stereo output with a frequency response of 450 Hz - 7 KHz
