Installation
- 6 -
D
Installation
After unpacking the
e-m@iler
, please retain all packaging in case you ever
need to transport the unit or return it for repair.
Installation notes
NOTE - The
e-m@iler
is designed for installation in UK only.
The
e-m@iler
will cease to operate unless it remains
connected to a suitable telephone exchange.
Do not install the
e-m@iler
in an excessively hot, cold, damp or dusty environment. The
e-m@iler
is intended for indoor use only (operating temperature: 5°C – 40°C). Locate
the
e-m@iler
close to both mains supply and telephone line sockets. For optimum
videophone picture quality, make sure the room is well lit, but do not position the
e-m@iler
with its screen directly facing a sunlit window.
The mains supply adaptor provided with the
e-m@iler
must be used only on the
following mains supply:
M
AC 230V
¶
50Hz
M
(Note the mains supply adaptor is packed in a small box within the main carton.)
The
e-m@iler
must not be exposed to dripping or splashing. Never place objects filled
with liquids (such as vases) close to the unit. If liquid is accidentally spilt or splashed on
the unit, disconnect the mains adaptor from the supply socket immediately and consult
your dealer.
No naked flame sources (such as lighted candles) should be placed on or near the
e-m@iler
.
7
WARNING – If the
e-m@iler
is subjected to a high voltage electrostatic
discharge, the unit may
reset
, as if just switched on. In these
circumstances any temporary information (for example, a partly
composed message) will be lost, as is the case after a power
interruption. Any stored messages and Address Book entries will not be
affected, however.