Registration
- 15 -
Registration procedure
Note, if you have previously owned an
e-m@iler
and already have an
existing
email address at
@amserve.com
or
@amserve.net
that you wish
to use, then
do not carry out this registration procedure
. Instead, go to
the section entitled 'Adopting an old
e-m@iler
account' on page 132.
If you wish to
abort
the registration procedure at any time, press
the
STOP
button on the
e-m@iler
. (Note that any details you've
entered will be cleared and you can start registration again.)
Note the first time you switch on the
e-m@iler
(after you’ve waited a minute for the unit to start
up), the
standby display
will appear (see right)
with the bottom line inviting you to:
Press the
[EMAIL] button to get connected
.
Now start registration at step 1 and follow the instructions on the screen. If you
get stuck at any point, look up the screen in question to find out what action is
required by you.
1. Press
the
button to start registration.
2. This screen gives you information on how to
use the
arrow keys and
ENTER
to go
forwards to the next display or back to the
previous display.
Action required:
When you've read this display, make sure that
l
D
Next
l
is highlighted (at the bottom left of the
screen) then press
ENTER
.
(Note if
l
D
Next
l
isn't
highlighted, press
D
to highlight it before pressing
ENTER
.)