AMSTRAD E3 e-m@iler, User Instructions, Page: 125 / 171

Advanced settings
- 123 -
Replacement
e-m@iler
If you're installing a replacement
e-m@iler
, you must first adopt your old
e-m@iler
account as described on page 132.
After adopting your old
e-m@iler
account, carry out the previous transfer procedure using
option
1
to transfer your Address Book entries.
&
If you are unable to transfer the Address Book entries because the message
Hold down [EMAIL] button to restore service appears, you will need to
make an email call first (do this by holding down the
EMAIL
button until
Dialling for email is displayed). Wait until the email call has finished, then
retry the above procedure.
Multiple
e-m@iler
s
If you have more than one
e-m@iler
at home or in the office (or both), you can use a
Pocket Dock-it to circulate the Address Book, as follows:
First determine your
master
e-m@iler
(containing the latest Address Book data). Plug
the Pocket Dock-it into that machine and use option
9
to transfer its data to the Pocket
Dock-it. Thereafter, you can insert that Pocket Dock-it into other
e-m@ilers
and use
option
1
to add the latest data to each user's existing Address Book.
IMPORTANT – When transferring data to other
e-m@ilers
from your Pocket
Dock-it, make sure you do not use option
2
or
9
.
& If you want to delete an Address Book entry, this has to be done on each
e-m@iler
individually (information on page 47).
EXP socket
Ignore EXP socket on back panel
–
for factory use only