Ametek 682T-HP, User Manual

Page: 39 / 118

Chapter 4: Calibration, Page 32
M o d e l 6 8 2 T - H P U S E R M A N U A L A T E X Z o n e 2
4 C
ALIBRATION
This 682T-HP Series On-line analyzer has been designed for the analysis of sulfur in oil. Samples with known sulfur
content will need to be presented to the analyzer before meaningful results can be achieved.
4.1 Calibration Sets
This 682T-HP Series On-line analyzer has four different calibration sets that can store calibrations for different
applications.
To change calibrations, make sure the Local/Remote door switch is in the LOCAL position and logon with the appropriate
password. Select the CalSet from the drop down menu in the Main Screen. The calibration sets are labeled CalSet0, CalSet1,
CalSet2, and CalSet3. Access is allowed for Operator2 (Level 2) or higher password.
To view the calibration parameters, press the CAL button at the middle bottom of the Main Screen.
The 682T-HP is shipped from the factory with example records installed in CalSet1 so you can test calibration
operations immediately. There is no guarantee that these example records will provide the best results for your