Ametek 682T-HP, User Manual

Page: 107 / 118

Chapter 10: Maintenance & Troubleshooting, Page 100
M o d e l 6 8 2 T - H P U S E R M A N U A L A T E X Z o n e 2
internal load memory of the CPU. The RUN/STOP LED alternately flashes green and
yellow to indicate that the program is being copied. When the RUN/STOP LED turns on
(solid yellow) and the MAINT LED flashes, the copy process has finished. You can then
remove the memory card.
4. Reboot the CPU (either by restoring power or by the alternative methods for
rebooting) to
evaluate the new program that was transferred to internal load memory.
The CPU then goes to the start-up mode (RUN or STOP) that you configured for the
project.
Note
You must remove the transfer card before setting the CPU to RUN mode.
10.2.2 Updating the TP-177B Software
Procedure to Backup or Restore TP700 with SD Card
Backup:
Exit any running program until the Loader or Start Center screen is displayed. If the
program cannot be exited, cycle power and once the Loader or Start Center screen is
displayed, quickly perform the next step (you have about 3 seconds).
If Loader is displayed, select the Control Panel button. If Start Center is displayed, select
the Settings button.
Find the icon for Service & Commissioning and open (double tap) the file.