S
ET
THE
IP A
DDRESS
Networked Indexer/Driver User Manual
ADVANCED MICRO CONTROLS INC.
114
2.2c Use the AMCI Net Configurator Utility (continued)
2.2c.8 Set the IP Address, Subnet Mask, and Default Gateway
Enter your desired values into the IP Address, Subnet Mask, and Default Gateway fields.
The Default Gateway setting is not optional! It must be set to a valid address on the chosen
subnet. Because the Default Gateway is often not used in device level networks, if you do not
have a required value for it, AMCI suggests setting the Default Gateway to the IP address of
your host controller.
2.2c.9 Set the Communications Protocol
The factory default protocol for the Networked Driver is EtherNet/IP. In order to use the Modbus TCP or
PROFINET protocols, simply click on the appropriate button.
2.2c.10 Write the New IP Address to the Networked Driver
Click on the [Set IP Address] button. If there is an error in the settings, the utility will tell you what is wrong.
Once they are all correct, the utility will write the new IP address settings to the unit. These settings are auto-
matically saved to nonvolatile memory.
2.2c.11 Remove Power from the Networked Driver
The new IP address will not be used until power to the unit has been cycled.
Task Complete
